PHS Series|Triple Screw Pumps Low Pressure Application, Triple Screw Pumps, Gujarat, India.
home Marine Pumps Triple Screw Pumps Low Pressure Application PHS Series
Send Enquiry
Download catalogue
This pump is designed to help solve problems in the ENGINE ROOM. Developed to fulfil new regulations on the environment, consumption and emissions. Technically developed to extend maintenance intervals and to operate with fluids with completely diverse viscosities and properties, from LSMGO to HFO. Its standard configuration uses MAGNETIC DRIVE couplers.
| INSTALLATION DATA | |
| Installation | Indoor or Outdoor |
| Environment | Industrial, Marine |
| Amb. Temperature Min/Max | -25°C (CS) and -40°C (LTCS) , storage only / 60°C ** |
| OPERATING CONDITIONS | |
| Fluids | Fuels (HFO, LFO,MGO,DO,LSMGO); Mineral and synthetic lubricating oil; |
| Solid content | 0%* |
| Viscosity range | between 1.2 and 5000 cSt ** |
| Speed | between 750 and 3600 rpm ** |
| Rotation (shaft view) | Clockwise |
| Counter clockwise on request | |
| TECHNICAL CHARACTERISTICS | |
| Design available | STANDARD SEIM, ABS Type Approval, |
| BV MODE II, RINA alternative testing | |
| Flow rate | between 6 and 200 lpm |
| (between 0.36 and 12 m3/h; between 1.6 and 52.9 GPM) ** | |
| Suction pressure | between -0.5 and 10 barg (between -8 and 146 psi) * |
| Delivery pressure | 16 barg (233 psi) MAX * |
| Operating temperature | between 0 and 150°C * |
| Seal | Mechanical |
| Bearing | Radial ball |
| Bearing lubrication | Self-lubricated |
| Drive | AC or DC motor |
| Construction shape | Horizontal or vertical |
| IN/OUT | Special versions |
| Safety valve | Internal recirculation |
| MATERIALS | |
| Body/Flange | GGG40* |
| Set of 3 screws | Nitrided carbon steel * |
| O-rings | Viton ® |
| Painting | On request |
| (*) For different values contact SEIM | |